Experienced aerial vehicles and old drivers are recruiting strokes. In order to avoid the above situations, the novice must psychologically overcome the nervous and scared feelings, and easily face the car. The correct car must be prepared in advance to avoid the mentality of the car. Panic and operational hurry. To do this, you will want to see two counts and three slows before your vehicle: At first glance, you will see the model, speed, and loading of the car, the width and solid condition of the road ahead, the pedestrians and vehicles along the road, and the on-street parking. And obstacles, etc.; second calculation, through the observation and comparison, to estimate the approximate location of the two vehicles at the time of intersection, the road situation, in order to leave a suitable horizontal safety interval; three slow, that is, when the car will slow down, approaching Poor conditions in the meeting should be to control the speed, not blindly meet, if necessary, should be the first stop. In addition, the car will also pay attention to the rules of the transfer, and timely and reasonable to allow line. At night there is no street lighting or poor lighting on the road, will Turn off the high beam and switch to the low beam.
Honed tube is well known as hydraulic cylinder tube in industries. As honed tubes are the most important material of manufacturing hydraulic cylinders Honed Tube,Hydraulic Honed Tube,Hydraulic Cylinder Tube,Honed Steel Tubing Shandong Guanzhou Iron and Steel Group Co., Ltd. , https://www.guanzhouiron.com
We manufacture the honed pipes using our factory`s [Suitable To Hone" Steel Cold Drawn Seamless Tubes (CDS tubes)& Steel Cold Drawn Welded Tubes (CDW tubes). In order to produce extremely precise ID dimensions and smoothly ID surface, the honing process involves using abrasive polishing stones and abrasive paper to remove small amounts of material. Besides the honing process, we also use the SRB process (skiving and roller burnishing) to produce honed tubing. Honed tube is ready to use for hydraulic cylinder applications without further ID processing.
Honed precision tubes are made of seamless steel tubes, with raw materials hot rolled, under cold drawn process then honing. They are widely used for manufacturing hydraulic cylinders. Honing is a finishing method whose goal is to ensure perfect surface grade, in our case final treatment of the inner diameter of the tube. Advantage of this classic procedure honing is high geometrical accuracy of the shape with minimal conicity and waviness of the surface.
Main applications of Hydraulic honed tubing:
Honed tubing and SRB tubes (skived and roller burnished tubes) are mostly used as cylinder tube, such as hydraulic cylinder tube and pneumatic cylinder tubing, which are widely used for manufacturing and repairing hydraulic cylinders and pneumatic cylinders. As honed tube usually has very accuracy dimension tolerance and good surface smoothness, so this product is also used in applications where precision dimension or high smooth surface is need.
During the driving process, many novices are afraid of the car. Especially when the car is on a narrow road, the novice tends to feel nervous. After a rush, there will be flameouts, stoppages, and even the two cars scratching and colliding with each other. , Or touch the roadside non-motor vehicles, pedestrians and roadside isolation facilities.