Food safety is a matter that everyone is most concerned about. Therefore, in the safe production of food production enterprises, safety inspection is always put in the first step. Taking wheat flour production as an example, according to the relevant standards and requirements, the use of ground wheat Must go through screening, magnetic separation, winnowing, stone removal and other cleaning processes, wheat flour before entering the finished product packaging process must be subjected to magnetic separation, which is the two most basic requirements, and to follow the prescribed process of production, you need Equipped with a professional magnetic metal detector for magnetic separation product testing to avoid food safety accidents caused by excessive magnetic metal in wheat flour.
The robot arms are usually used in plastic molding industry and automatic production line to stead of human hand.
Robotic arm is a type of mechanical arm, usually programmable, with similar functions to a human arm.
The arm may be the sum total of the mechanism or may be part of a more complex robot.
The links of such a manipulator are connected by joints allowing either rotational motion (such as in an articulated robot) or translational (linear) displacement.
The links of the manipulator can be considered to form a kinematic chain.
The terminus of the kinematic chain of the manipulator is called the end effector and it is analogous to the human hand.
Industrial Robot Arm,Injection Molding Machine Robot Arm,Sewing Type Robot Arm,Plastic Robot Arm Machine Ningbo Rainbow Plastics Machinery Co., Ltd. , https://www.injection-machine.com
Generally speaking, in the processing production, since the grinding of the machine and the impurities contained in the wheat may cause the magnetic metal material such as tiny hard iron scraps mixed in the processed flour, although the human body needs to supplement the iron, These magnetic metals are actually different from the iron that is formed from the binding of organic molecules in slaves and plants. These magnetic metals, when they enter the body, adhere to the stomach and the intestinal wall and cannot be digested and absorbed, and are difficult to discharge. Injury to the human body, so to ensure the safety of people's lives, it is very important to use surface magnetic metal detectors to strictly control the content of magnetic metals in powdered wheat flour.
Because magnetic metal detection is so important, general wheat flour processing companies are equipped with magnetic metal detectors. However, they are not equipped with magnetic metal detectors. They indicate that the product is safe and qualified, and some companies have installed magnetic Metal detectors, but due to unreasonable installation, weak magnetic attraction, poor management, etc., in fact did not play the instrument should have the test results, or even because of the test equipment behind (magnetic attraction is low) or inspection operation is wrong Therefore, it is difficult to detect the iron filings in the mixed powder. As a result, the problem of excessive iron filings in the product has occurred, but it has not been discovered in time. Therefore, there is a large potential safety hazard. Therefore, it is necessary to further strengthen food safety and ensure powdery food products. For safety, then the installation of magnetic metal detectors must comply with the process requirements for the production of flour-based food products, strive to improve the accuracy of magnetic metal detection, and ensure that the factory-produced wheat flour is qualified and safe.