Non Woven Headrest Cover Making Machine
This is a machine which used to produced the disposable head rest cover .The head rest cover is normally used on the airplane /bus and train . This machine is fully automatic from the material`s feeding to the final products` output , and only need one operator . The machine can reach the speed of 80-100 pcs/min. We can make the machine according to the customer's detailed
requirement. Only need to change the mold of different products size.
Non Woven Headrest Cover Making Machine Non Woven Headrest Cover Making Machine,Airline Headrest Making Machine,Headrest Covers Making Machine,Headrest Cover Making Machine KYD Automatic Mask Machine Factory , https://www.kydultrasonic.com
Some video matrices also have audio switching capabilities that enable the simultaneous switching of video and audio signals. This matrix is ​​also called video and audio matrix. The current video matrix has two major categories: analog matrix and digital matrix. Video matrix is ​​generally used for various monitoring occasions. 
The keyboard controller is a product that is matched with a terminal receiver such as a variable speed smart dome, a decoder, and a matrix. The EIA/RS-485 electrical interface is used between the control keyboard and the receiver. Without the bus driver, a keyboard can control up to 32 billiard machines or decoders. The maximum communication distance between the keyboard and receiver is 1.2Km. The control keyboard can be conveniently used to control and set the variable-speed dome camera. The control keyboard can also directly control the terminal decoder to control the front-end equipment such as constant-speed pan/tilt, lens, light, and wiper of the camera. Fast switching. 
Three-dimensional vector variable speed joystick, controllable speed and variable speed PTZ and integrated fast ball, with 64 preset, 64 PTZ speed, 8 lens speed. Three-dimensional joysticks can be used for variable-speed control of ordinary and variable-speed lenses. Up to 168 PG1640 series decoders can be equipped to control 168 heads. The two-dimensional keyboard has relatively few functions.
First, the basic functions and requirements as a video matrix <br> <br> video matrix, a feature is most important to achieve the output switching input video image. Accurately generalize it: Switch the video image from any input channel to any output channel display. In general, an M×N matrix means that it can support both M channels of image input and N channels of image output. What needs to be emphasized here is that it must be done arbitrarily, that is, an arbitrary input and an arbitrary output. 
In addition, a matrix system should also generally include the following basic functions: character signal superposition; decoder interface to control pan and tilt and camera; alarm interface; control host, and audio control box, alarm interface box, control keyboard and other accessories. For domestic users, character superposition should be all Chinese, to facilitate the use of operators who do not understand English, the matrix system also needs to support cascading to achieve higher capacity, in order to adapt to different users of the matrix system capacity requirements, matrix The system should support modular and plug and play (PnP), which can be achieved by adding or subtracting video input and output cards.
The development direction of the matrix system is multi-functional, high-capacity, networked, and remote switching. In general, the capacity of the matrix system reaches 64×16 which is a large capacity matrix. If a larger capacity matrix system is needed, it can also be achieved by cascading multiple matrix systems. The greater the capacity of the matrix, the higher the required technical level, and the greater the difficulty of the design.
Second, the classification of video matrix According to different ways to achieve video switching, video matrix is ​​divided into analog matrix and digital matrix.
1, simulation matrix: 
Video switching is done at the analog video layer. Signal switching is mainly implemented using a single-chip microcomputer or a more complex chip-controlled analog switch.
2, the digital matrix: 
Video switching is done at the digital video layer. This process can be either synchronous or asynchronous. The core of the digital matrix is ​​the processing of digital video. It is necessary to add AD conversion at the video input, change the analog signal to a digital signal, increase DA conversion at the video output, and convert the digital signal to analog signal output. The core part of the video switching is analog switch of the analog matrix, which will become the processing and transmission of digital video.
Video matrix can be said to have been applied widely in our daily monitoring system. By switching the signal, any one input is displayed on the set display terminal, and a series of operations such as zooming in, zooming out, zooming in, zooming out the lens, and the like can be performed. This can not only play a role in monitoring, but also can largely avoid the waste of one input terminal corresponding to one input signal. This is the convenient operation of the video matrix.
The video matrix refers to an electronic device that outputs an M-channel video signal to an N-channel monitoring device arbitrarily through an array switching method. Generally, an input of a matrix is ​​greater than an output, that is, m>n.