[China Instrument Network Instrument Industry] Recently, Anhui Liu'an Water Conservation Office launched the third quarter plan for water assessment. Since the third quarter of this year, Luan City has gradually achieved full coverage of planned water users' remote meters, and started to use remote meter data as an assessment basis. The data shows that in the third quarter, there were a total of 93 households with over-planned water use, and the total amount of water used for the ultra-planned project was 150,000 tons.

The rotor in a mechanical water meter requires a minimum flow to rotate, and the rotor has a certain basic resistance, which must be overcome to ensure rotation in the presence of water flow. Therefore, this method can only charge for the approximate amount of water consumed by each household. The "measurement leakage" caused by the inaccuracy of mechanical water meters has limited our ability to accurately determine where the wasted water has gone and also limits the ability of water management to enter the modernization stage.

Remote water meter, compared with traditional water meter, it has no mechanical transmission parts, no pressure loss, not affected by water hammer and large flow impact, higher sensitivity, solves the problems of instant data collection, water metering, water supervision, etc. This method has a strong deterrent effect, so that users do not dare to easily make a fuss on the water meter, so that users can greatly reduce the situation of stealing water.

Based on the above factors, the use of remote water meters has greatly enhanced the accuracy of planned water management, and has contributed to the promotion of water users' efforts to strengthen water management and actively save water.

(Original title: Accurate metering effect of remote water meter shows that the amount of ultra-planned water in the third quarter reached 150,000 tons)

Aluminum wire includes aluminum silicon wire ER4043, aluminum-magnesium wire ER5356 and other aluminum alloy wire.
Pure aluminum wire ER1100 Features: pure aluminum wire, aluminum content ≥ 99.5%, with excellent corrosion resistance, high thermal conductivity and conductivity, and excellent machinability. For anodized materials, the need for color is very ideal, recommended for welding 1000 series aluminum alloy. Typical chemical composition: Si≤0.03, Cu≤0.002, Zn≤0.013, Fe≤0.18, Mn≤0.003, AL allowance is widely used in railway locomotive, electric power, chemical, food and other industries.
Al-Si alloy wire ER4047 Features: This product is silicon 12% alloy wire, suitable for welding all kinds of casting and extrusion molding aluminum alloy. Low melting point and good liquidity make the base metal welding deformation is very small. Typical chemical composition: Si 12, Mg ≤ 0.10, Fe ≤ 0.80, Cu ≤0.03, Zn ≤ 0.20, Mn ≤ 0.15, AL allowance Use: welding or surfacing light alloy processing industry.
Al-Si alloy wire ER4043 Features: This product is silicon-containing 5% alloy wire, suitable for welding cast aluminum alloy Typical chemical composition: Si 5, Mg ≤ 0.10, Fe ≤ 0.04, Cu ≤ 0.05, AL allowance Use: Locomotives, chemicals, food, sports equipment, molds, furniture, containers, containers.
Aluminum-magnesium alloy wire ER5356 Features: This product is magnesium alloy with 5% alloy, is a versatile wide range of welding consumables, suitable for welding or surface surfacing 5% magnesium cast and forged aluminum alloy, high strength, Good, good corrosion resistance. This product can also provide a good color for anodized welding. Typical chemical composition: Mg 5, Cr 0.10, (Fe + Si) 0.3, Cu≤0.05, Zn 0.05, Mn 0.15, Ti 0.1, AL allowance Use: bicycles, aluminum scooters and other sports equipment, locomotive, chemical pressure vessels, Production, shipbuilding, aviation and other industries.
Aluminum-magnesium alloy wire ER5183 Features: This product is magnesium alloy with 3% of the alloy wire, welding or surface welding for the same level of aluminum alloy material. Typical chemical composition: Mg 3.5, Cr 0.2, Fe 0.15, Cu≤0.05, Zn 0.10, Mn 0.05, Ti 0.1, AL allowance Use: chemical pressure vessel, nuclear industry, shipbuilding, refrigeration industry, boiler, aerospace industry.
We have Mig Spool Aluminum Welding Wire, size 0.6mm, 0.8mm, 1.0mm, 1.2mm etc. TIG straight aluminum welding wire, size 1.6mm, 1.8mm, 2.0mm, 2.4mm, 3.2mm etc. Aluminum alloy Welding Wires can Pack with 0.5kgs, 2kgs, 5kgs, 7kgs, 15kgs etc.

Aluminum Welding Wire

Aluminum Welding Wire,5356 Aluminum Welding Wire,Aluminum Alloy Welding Wire,Aluminum Mig Welding Wire

Changzhou Edaweld Trading Company Limited , https://www.edaweld.com