High Quality Tricycle Dumper with 3 Wheels for Construction and Mining

 

Model introduction

Shifeng mine three cars is three wheeled automobile Research Institute for meet the needs of the battlefield, mines, engineering construction, combined with the actual situation in different regions over the past few years, the development and perfection of the varieties. This series of models is flexible, convenient, practical, durable, excellent matching power frame characteristics by different users, the existing mine mine hand series, two seater channel (profile) frame, two seater Mini mine series, closed mine series, mine vehicle battery. Optional configuration is more flexible, such as the front windshield with half shed, hand zixon Dream Star half shed, mine in the Wang Ban studio, no studio optional accessories overall configuration, steering system, mid cycle ball mid disc configuration, braking system, brake oil, organic brake booster (oil brake) vacuum booster, configuration, after the bridge has four stalls, seven stalls, eight stalls, ten stalls configuration, increased leaf spring, the leaf spring system 11 spring (lower vehicle height) configuration, length 1.35*1.1, 1.5*1.0 container and 1.5*1.15 (San Kai), 1.65*1.2, 1.8*1.0 (1.2, 1.35), 1.8*1.15 (San Kai) 1.9*1.2 (1.3, 1.35), 1.9*1.4 (three), 2.0*1.35 meters, 2.12*1.4 (1.5) (three), 2.2*1.35 (1.5), 2.36*1.4 (1.5) (three) configuration, in addition to simple shed, narrow track, steel container, level Four Air filter, exhaust water filtering, auxiliary heat and other special configuration option, and also according to the specific needs of users, for some specifications of products, part of the structure of the custom, great to meet the needs of users.

Specification of three wheelers
 

MODEL NO.	MINING
CABIN	HALF
CABIN	HALF
OVERALL DIMENSION	3950×1420×1450
CARGO BODY DIMENSION	2200×1400×600
TOTAL GROSS WEIGHT	960KGS
LOADING CAPACITY	2000KGS
FUEL	DIESEL
WHEELBASE(mm)	2600
REAR TREAD(mm)	1240
FRONT TYRE	450-14
REAR TYRE	650-16
TRANSMITING TYPE	BELT
ENGINE	ZS1105,ZS1110,ZS1115
OUTPUT	18HP,20HP,22HP
	12.12kw,13.2kw,14.7kw
ENGINE RATED SPEED(r/min)	2200
ENGINE TOTAL DISPLACEMENT(L)	0.996,1.09,1.19
ENGINE BORE X STROKE	105×115,110×115,115×115
CLUTCH TYPE	DUAL,DRY
GEAR BOX	6+1
SPEED RATIO	HIGH:13.6/5.39/3.13 R:19 LOW:37.9/15/8.71 R:19
FUEL CONSUMPTION(L/100KM)	3.5

Spiral Pipe Screw Conveyor

Install adjustment:

1.The screw conveyor can not be installed until the dust stuck during transportation or unloading

is cleaned.

2.Material groove center line and screw shaft should have an appropriate coaxial degree.

3.The drive device and the screw shaft should have a right coaxial degree.

4.The static equilibrium test should be carried out after the screw is installed.

5`After the conveyor installed, check whether there is any debris in the machine and if the lubrication is enough.

6.During the no-load test, the bearing should be oil-tight, and the bearing temperature should not be higher than 20℃. During the load test,the temperature of bearing should not exceed 30℃.

Attentions

(1) Lubricate the bearings, gears, chains and other transmission parts regularly.

(2)When the box-to-send machine stopped, check the abrasion of the spiral blade and repair and weld it when it wears seriously.

(3)The conveying amount can not be overloaded, otherwise the material will not be discharged, which may cause the screw shaft bending and box expansion.

(4) In the operation of the conveyor, if the noise is harsh, you should open the lid to check it and troubleshoot.

Flexible Screw Conveyor,Small Screw Conveyor,Cement Screw Conveyor

Zhengzhou XinFeng machinery manufacturing Co. Ltd , https://www.xfmachinery.com