In the investment casting industry, steel castings are the most used castings in the manufacturing industry, and are widely used in equipment, agricultural machinery, machining, and automobile industries. Metal castings can produce parts with complex shapes, but there are also requirements for the design of the product structure. In the case of meeting the requirements of use, it should also try to comply with the casting process. For example, in the structural design, care should be taken not to have thin walls, which may easily lead to dissatisfaction with pouring or product deformation; for example, try not to have sharp corners, try to use radian transitions; and try not to appear small and deep blind holes, It will cause great trouble for foundry sand cleaning. Of course, there are many other structural problems. We will improve and optimize the product structure according to the customer's drawings without changing the customer's functional use, so as to maximize the product qualification rate and production efficiency. In some cases where the structure cannot be changed, we will also perform some follow-up processing after casting according to actual problems, so that the expected results can also be achieved.
Casting Steel,Casting Investments,Castings Services,Wax Casting,Casting Metal,Contact Castings,Sand Casting,Cast Metal,Small Castings Shenzhen SCZY Technology Co.,Ltd , https://www.szcasting.com
1.Machine List
Machine list
Â
Â
Â
Â
Â
5 ton hydraulic de-coiler (optional)
1 set
Main roll forming machine
1 set
PLC Control box
1 unit
Hydraulic station
1 unit
Servo following cutting
1 unit
Out table
2 units
1.Technical process
Uncoiling-Feeding with guide--Roll forming-Cutting-Products collecting
Â
1.Un-coiler: 5 ton hydraulic
2.De-coiling Holder: about 1500mm×1500mm×1700mm
3.Insider diameter of the un-coiler: 508-610mm
2)Roll forming machine:
1.Roll Forming Machine: RF-RP
2.Rolling Speed: 25-35m/min(cutting time is not include)
3.Steel sheet Thickness: 0.3-0.8mm color painted sheets, steel
4.Coil width 914mm
5.Control System: PLC Panasonic
6.Roller Stations: about 20 stations
7.Roller Material: 45# forge steel, coated with chrome
8.Shaft Material and DIA:¢75mm,material is 45# forge steel, Chrome with quenching
9.Maim Motor Power: 5.5kw Anhui wannan Brand
10.Hydraulic Pressure: 12Mpa
11.Material Of The Stations: Wall plate thickness 16mm
12.Tolerance: +1.5mm
13.Power supplier:220V, 60HZ,3 phase
14.Way Of Drive:1.2 inch single chain
15.Color Of The Machine :blue
16.The size of the forming machine:8000*1500*1000mm
17.Machine weight: about 6 tons
18.Angle accuracy: +-1degree
3)Cutting:
1.Cutting motion: Â Servo following cutting
2.Material of blade: CR12 with heat treatment
3.Length measuring: Automatically
4.The cutting thickness: 0.3- 0.8mm
5.Hydraulic Station Power: 4 KW
4.)Out table:
Size:4000*1350*1000mm
5)Control Box:
Electrical control system part, Yaswaka Japan Brand
1.Power supplier: 380 V, 50 Hz, 3Phase (adjusted with the requestment)
2.length & quantity measurement automatically;
3.length & quantity controlled by PLC,
4.Length inaccuracy can be amended easily.
5.Control panel: Button-type switch and touch screen
6.Unit of length: millimeter (switched on the control panel)
 FAQ
1)Q:Can you make machine according to my design?
  A:Yes, we have experienced technical team to work out the suitable design for you and confirm with you until you agree.
2) Q: Will you deliver the right goods as ordered? How can I trust you?
  A: Yes, we will. The core of our company culture is honesty and credit.
3)Q:What payment terms you accept?
  A:Commonly is TT, 30% deposit and 70% before shipment, and sometimes we can consider more for you as per your request.
4) Q:What is the warranty for our machine?
  A:We have one year guarantee, and provide whole life's technical support.
Â
Â
Model NO.: EN-120WR
Machine Weight: About 6 Tons
Roller Material: 45# Forge Steel
Hydraulic Pressure: 12MPa
Tolerance: +1.5mm
Trademark: Ensource
Transport Package: Plastic Film, Container
Specification: EN-120WR
Origin: Zhejiang, China
HS Code: 8474801000
Roof Panel roll forming machine2.Technical Data
1.)Un-coiler: