Zoomlion multi-function dust suppression vehicle Multifunctional dust suppression vehicle safety instructions "Autumn Tiger" is the first Geng Day after the beginning of autumn, and it is also the last volt in the three days. The Central Meteorological Observatory issued a high-temperature yellow warning on August 16. The highest temperature in most parts of China can reach 37~40 °C. All over the country are using Zoomlion's multi-functional dust suppression vehicle spray to cool down and suppress dust. What should be paid attention to before, during and after the use of the vehicle? before use Check the tire nut, the fastening bolts and the pin shaft for looseness, check the appearance and air pressure of the tire; check whether the appearance and position of the cleaning nozzle, spray device, etc. are normal; Check the vehicle for oil leakage, water leakage and air leakage; Check if the fuel, cooling water, lubricating oil and brake fluid are normal; Check if the hydraulic oil tank is suitable, and the hydraulic fuel tank controls whether the ball valve is open; Start the main and auxiliary engines, observe whether the operation is normal; check whether the car instrument, air pressure, light, service brake, hand brake, etc. are normal; the working pressure of the power take-off cylinder is (0.65~0.8) MPa, when the air pressure is satisfied , the power take-off is connected and disconnected normally; After the inspection, each electronic control switch is set to the closed position or the neutral position; Fill the jug with water. Using The water pump of the low-pressure waterway of the vehicle is driven by the power take-off of the chassis gearbox. During the cleaning operation, it is forbidden to operate the gearbox to shift gears; In the cleaning operation, when the gearbox needs to be shifted, it should be stopped before shifting; When operating the power take-off switch, stop first, press the clutch pedal, and then press the push button switch to make the power take-off unit (the indicator light is on). When not working, the switch must be pressed to reset (the light is off), so that the power take-off is disengaged and then driven; The pump is strictly prohibited from running without water, otherwise the pump will be damaged. The water tank is equipped with a low water level alarm. When the alarm occurs, the work should be stopped in time to avoid water shortage damage. After use After use, the water filter element is often cleaned to keep it clear and intact, to prevent nozzle clogging and affect the use effect. Before the decommissioning in winter, the water release and antifreeze work should be done. The water ball valves should be placed in the open position to prevent the water from freezing and cracking the valve body. Summer taste line (provided by fur) Beijing-Tianjin-Hebei industry friends are blessed, Xiaobian released a heavy news. From September 10th to 12th, the “2016 Beijing-Tianjin-Hebei Second Urban and Rural Environmental Sanitation New Technology New Equipment and New Technology Expo†was held in Hebei Langfang International Convention and Exhibition Center. At that time, Zoomlion will bring a variety of star products to participate in the exhibition, invite you to visit! (This article is from Zoomlion) Some other types of mining machines include: Other Mining Machines,Vibrating Screen Machine,Slag Tank Tipper,Mining Sintering Machine Shenyang North Heavy Metallurgical Engineering Technology Co., Ltd. , https://www.nhmetallurgy.com
1. Dragline excavators: These are large machines used in surface mining operations to remove overburden (the soil and rock covering the mineral deposit) and extract the minerals.
2. Bucket-wheel excavators: These machines have a large wheel with buckets attached to it, which are used to scoop and remove large amounts of soil and rock in surface mining operations.
3. Underground mining equipment: This includes various machines used in underground mining operations, such as drill rigs, loaders, haul trucks, and roof bolters. These machines are specially designed to work in confined spaces and extract minerals from underground deposits.
4. Longwall mining machines: Longwall mining is a method used to extract coal from underground mines. It involves the use of a shearer machine, which cuts and removes the coal in a continuous process.
5. Continuous miners: These machines are used in underground mining operations to cut and extract coal or other minerals. They have a rotating drum with cutting teeth that scrape the material from the mine face.
6. Crushing and grinding machines: These machines are used in the processing of mined materials to break them down into smaller sizes. Crushers and mills are commonly used in this process.
7. Dredges: Dredges are machines used to extract minerals from underwater deposits, such as sand, gravel, or gold. They use a suction or bucket system to remove the material from the bottom of rivers, lakes, or oceans.
8. Trommels: Trommels are cylindrical machines used in placer mining operations to separate and classify materials based on their size. They have screens or perforated plates that allow smaller particles to pass through while larger ones are retained.
9. Jigs: Jigs are gravity separation devices used in mining operations to separate minerals based on their density. They work by pulsating water through a bed of material, causing heavier particles to settle while lighter ones are carried away.
10. Magnetic separators: These machines use magnets to separate magnetic minerals from non-magnetic ones. They are commonly used in the mining of iron ore and other magnetic minerals.
These are just a few examples of the many types of mining machines used in different mining operations. The specific machines used will depend on the type of mining being done, the characteristics of the mineral deposit, and other factors.