Hi-Carbon Steel Cut Wire Shot, also named Reinforced Steel Shot, has a great effect on die casting parts which has a high hardness because Longlived Hi-Carbon Steel Cut Wire Shot also have high hardness while other Metal Abrasive can not meet.
Longlived Hi-Carbon Steel Cut Wire Shot is made from high quality hi-carbon steel wire by drawing, cutting and rounding. Its chemical composition is : Si:0.10-0.30%, Mn:0.40-1.20%, C:0.45-0.85%, S≦0.04%, P≦ 0.04%. Longlived Hi-Carbon Steel Cut Wire Shot is producted strictly in accordance with German standard VDFI8001/2009 and American standard SAEJ441,AMS2431. There are four types of hardness of Longlived Hi-Carbon Steel Cut Wire Shot and they are HRC 45-50, HRC 50-55, HRC 55-60 and HRC 58-63. As the development of advance technology of Longlived Metal, we have five shapes and they are as cut, G1, G2, G3 and even G4 condition, which could meet most requirement of clients. In addition, the size of Longlived Metal is from 0.25mm-2.5mm and size also could be customized if need. Longlived Hi-Carbon Steel Cut Wire Shot has a great fatigue life and it could be recycled from 3,500 times to 9,000 times. It could not only save cost but also make shot blasting faster and cleaner.
Hi-Carbon Steel Cut Wire Shot,High-Carbon Steel Cut Wire Shot Peening,High-Carbon Steel Cut Wire Shot Blasting,High-Carbon Steel Cut Wire Shot Distributor Longlived Metal Products Co ., Ltd , https://www.longlivedmetalproducts.com
Lightbox failure analysis
The light box is a device that provides a plant growth environment such as temperature, humidity, and illuminance, and it is designed to simulate a natural environment. Compared with the natural environment, lightboxes have human controllability and are therefore widely used in agricultural operations. Similar to the seed germination box, it can provide a variety of environmental parameters suitable for the growth of the crop, allowing it to grow under optimal conditions. This not only shortens the cycle of plant growth, but also greatly increases the yield of plants.
In the process of using the light box, sometimes there are some problems: for example, the light is not lit, can not be heated, or the noise is not large when the cooling is not necessary. These problems may not necessarily be the deterioration of the instrument, in part due to improper operation The following is the analysis of the above failure factors by simply picking up some simple knowledge of the instrument for simple maintenance:
malfunction
the reason
malfunction
the reason
Poor cooling effect or no refrigeration
Most are coolant leaks or capillary blockages
Running disorder or not running according to setup parameters
It may be 24C02 broken
No noise when cooling
Recirculation fan fixing screws loose
The key does not work
May be broken keys or loose sockets
Not heated
Heating tube, heating fan or SCR broken
Absorption and release sound of relay cannot be heard during normal operation
May be an optical defect or a relay failure
Illumination is off
Most of the lamp pins are not aligned or loose, and they may be damaged electronic ballasts or lamps.