1, the general pressure for nitrogen in the 3 × 105 ~ 10 × 105Pa between. 2, nitrogen discharge valve installed in the top of the tank, the caliber of the inlet valve is generally the same caliber. 3, the general pressure relief valve nitrogen set point slightly larger than the pressure for the nitrogen valve set point, so as to avoid, frequent nitrogen discharge device work, waste nitrogen, affecting equipment life. 4, tank top breathing valve only plays a safety role in the main valve failure, resulting in the tank pressure is too high or too low, play a safety role, under normal circumstances do not work. 5, if the user conditions are different with the selection manual, hope the contact with the factory technology development department, negotiated settlement.
Y83 series block making machines are industrial machines designed to make maximum use of metal swarf such as cast iron, aluminum, copper, steel, brass, zinc, bronze, titanium and magnesium, they are also suitable for other machining scraps by pressing them into briquettes. It results in economic benefits for companies that generate the swarf, companies that recycle metal scraps, and for foundries that process the scraps. Also there is environmental benefits resulting from the briquetting process.
Metal Block Making Machine, Scraps Block Making Machine, Aluminum Block Making Machine, Steel Block Making Machine, Chips Block Making Machine Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.jiangyinyeya.com
ã€Print】 ã€Close】