Excavator pipe fittings and tube fittings are essential components in the hydraulic system of excavators. These fittings are used to connect hydraulic hoses and tubes to various components of the excavator, such as the hydraulic pump, cylinders, and valves. Pipe Fittings ,Hydraulic Plumbing Fitting,Hydraulic Pipe Fitting,Hydraulic Tube Fitting CATSU Hydraulic Machinery Equipment Co.,Ltd , https://www.cattiltrotator.com
Product Description
 The main features of our product
1.the dust content ≤ 100 mg / m³,SO2 ≤ 250 ~ 300 mg / m³,NO2 ≤ 400 mg / m³;
2.slag-catch rate≥85%;
3.carbon content in the slag is about 1%;
4.the burn-off rate≥ 99%, carbon content in the slag is about 1%, Yellow-white slag;
5.removal efficiency ups to 99%;
6.the coal consumption can be reduced by 25~30% or more.
7.outside furnace slag discharging;
8.electromechanical integration;
9.pure flames with little ash.
Â
Specific Description
1Â Two series of products: removable vertical and horizontal pulverized coal burner.Â
2 The flue gas dust and ash going to the main part of the boiler only accounted for 15%total combustion, most of which going into the dust collection system outside the furnace.Â
3 Combustion effect is the same with that of oil and gas-combustion industrial boilers.Â
4 A wider range for coal. We can use common bituminous coal, anthracite, brown coal and even the low quality coal.
5Â Achieving PLC automatic thermal instrumentation control system:
6This product can use double materials-- pulverized coal and wood flour, as fuel, whose burn-off rate can reach 99% and the slag content can reduce to 2% ~ 3%.Â
7 4T ~ 20T / H steam (hot water) boiler can cut out the chain of the chain-type boiler , bottom blowers, the gate of steel warehouse and coal feeder, and screw slag discharging. Thereby the weight and cost of the boiler has been greatly reduced. Â
Â
Product Applications:
It applies to 4T ~ 20T / H small and medium sized industrial steam (hot water) boiler, and other no-oil and no-gas industrial furnaces which not allow ash contamination.
It can provide qualified high temperature flue gas and high-temperature air flow andreducing the cost of industrial boilers.
Project pictures:
The product composition:
1.coal scraper conveyor series;
2.horizontal mill or energy-efficient fan-type mill series;
3.dual-swirl pulverized coal burner series;
4.secondary air fan series;
5.cyclone cylinder (horizontal or vertical) series;
6.slag discharging system;
7.automatic diesel ignition system;
8.the automatic control system of thermal instrumentation
There are various types of excavator pipe fittings and tube fittings, including:
1. Flanges: Flanges are used to connect two pipes or tubes together. They are usually bolted together and provide a leak-free seal.
2. Adapters: Adapters are used to connect two different types of fittings or components. They can be male or female, and can be used to connect hoses, tubes, or other components.
3. Elbows: Elbows are used to change the direction of a pipe or tube. They come in various angles, such as 45 degrees or 90 degrees.
4. Tees: Tees are used to connect three pipes or tubes together. They come in various configurations, such as equal tees or reducing tees.
5. Couplings: Couplings are used to connect two pipes or tubes together. They can be either rigid or flexible, and are often used in tight spaces where movement is limited.
Excavator pipe fittings and tube fittings are made from various materials, including steel, brass, and aluminum. The choice of material depends on the application and the environment in which the excavator is used. For example, steel fittings are often used in high-pressure applications, while brass fittings are used in low-pressure applications.
Overall, excavator pipe fittings and tube fittings are critical components in the hydraulic system of excavators. They ensure that hydraulic fluid flows smoothly and efficiently through the system, enabling the excavator to perform its tasks effectively.