Model NO.: HT-LXP
Voltage: 380V
Power: 1.35kw
Name: Automatic High Speed Liquid Spray Dryer Machine
Certification: TUV SGS
Structure: Spraying Drier
Operation Pressure: Vacuum Dryer
Drying Medium: Superheated Steam
Movement Way: Spraying
Type of Flow: Contra-Flow
Sprayer: Air-Flowing Type
Trademark: HONEST
Transport Package: Fumigation-Free Wooden Case
Specification: 1.8*0.93*2.2m
Origin: China
                          Automatic High Speed Liquid Egg Powder Spray Dryer Machine
 
 
1.Machine Description:
Centrifugal Spray Dryer Machine is the technology most widely used in the liquid technology shaping and in the drying industry.The drying technology is most suitable for producing solid powder or particle products from liquid materials,such as: solution, emulsion, suspension and papumpable ste states,For this reason,when the particle size and distribution of the final products, residual water contents, mass density and the particle shape must meet the precise standard, spray drying is one of the most desired technologies.
 
2.Working Principle :
After been filtered and heated the air enters into the air distrbutor on the top of the dryer.The hot air enters into the drying room in the spiral form and uniformly. Passing through the high-speed centrifugal sprayer on the top of the tower,the material liquid will rotate and be sprayed into the extremely fine mist liquid beads.Throug the very short time of contacting the heat air,the materials can be dried into the final products.The final products will be discharged continuously from the bottom of the drying tower and from the cyclones. The waste gas will be discharged from blower.
 
3.Machine Features:
The drying speed is high when the material liquid is atomized,the surface area of the material will increase greatly.In the hot-air flow,95%-98% of water can be evaporated at a moment.The time of completing the drying is only several seconds. This is especially suitable for drying the heat sensitive materials. Its final products own the good uniformity, flow ability & solubility. And the final products are high in purity and good in quality. The producition procedures are simple and the operation and control are easy.The liquid with moisture contents of 40-60%(for special materials,the contents might be up to 90%).can be dried into the powder or particle products once a time. After the drying process, there is no need for smashing and sorting,so as to reduce the operation procedures in the production and to enhance the product purity.The product particle diameters,looseness and water contents can be adjusted through changing the operation condition within a certain range. It is very convenient to carry out control and managment.
 
4.Technical Parameters:
Paramters Type:HT-LXP
5 25 50 100 150 200-2000
Inlet temperature °C 140~350 Automatically controlled
Outlet temperature °C ~80-90
Water evaporation capacity kg/h 5 25 50 100 150 200-2000
Drying form of centrifugal nozzle Compressed air Mechanism drive
Revolution of atomizer (r.p.m) 25000 18000 18000 18000 15000 8000-15000
Diameter of atomizing disc(mm) 50 100 120 140 150 180-340
Heating source Electricity Electricity+Steam Electricity+Steam,Oil fuel,gas Depends on the user
Max. power of electric heater (KW) 9 36 63 81 99  
Overall dimension (m) 1.8×0.93×2.2 3×2.7×4.26 3.7×3.2×5.1 4.6×4.2×6 5.5×4.5×7 Depends on practical conditions
Dried powder recovery rate % ≥95 ≥95 ≥95 ≥95 ≥95 ≥95

5.Pictures:
Automatic High Speed Liquid Egg Powder Spray Dryer Machine

5.Certification:
Automatic High Speed Liquid Egg Powder Spray Dryer Machine

6: Packing & Delivery:
Automatic High Speed Liquid Egg Powder Spray Dryer Machine

7. Our Customers:
Automatic High Speed Liquid Egg Powder Spray Dryer Machine

8.Contact information:
If you need further information, please contact us freely, we will do our best to cooperate with you.
 

Excavator Grapple

CATSU 5-tooth grapple could refer to a type of attachment for heavy equipment such as excavators or skid steers. It is designed to grip and hold materials such as logs, rocks, and debris with its five sharp teeth.

CATSU 5-tooth grapple can be operated hydraulically and is commonly used in forestry, construction, and demolition industries.

CATSU excavator grapple is an attachment that is mounted on the arm of an excavator, which is used to grab and hold onto objects.

CATSU excavator grapple is designed to be used for a wide range of applications, including demolition, construction, forestry, and landscaping.

CATSU excavator grapple is made up of a set of jaws that can be opened and closed using hydraulic power, allowing it to grab and hold onto objects of various sizes and shapes.

CATSU excavator grapples come in different sizes and configurations to suit different types of jobs and excavators of different sizes.

Excavator Hydraulic Grapple ,Log Grapple For Excavator,Rotating Grapple For Excavator,Rock Grapple For Excavator

CATSU Hydraulic Machinery Equipment Co.,Ltd , https://www.tiltrotatorcat.com