Due to the scope of his work, a heavy-duty wrecker should be a relatively oil-consuming vehicle. Here are some ways to save fuel. During the process of wrecker driving, pay attention to the water temperature table, and the normal water temperature of the engine should be maintained between 80°C and 90°C. If it is too high or too low, it will increase fuel consumption. Special attention should be paid to the fact that if the water tank is insufficient, the water temperature can quickly rise. When the water temperature exceeds 95°C, the fuel consumption is increased by 30%-40% compared to the normal temperature, and the wear and damage to the machine parts can easily occur. Regularly check the oil and lubricant level, and change the oil and lubricant according to the schedule. GYQ drilling rig is an upgraded and improved product of GXYdrilling rig. It mainly adds the winch detachment Gyq Drilling Rig,Gyq Survey Machine,Gyq Survey Rig,Spindle Core Drilling Rigs JIANGSU XI TEC ENVIRONMENTAL&DRILLING EQUIPMENT COMPANY CO.LTD , https://www.sjxitecdrilling.com
Correctly maintain the engine, select the brand's authentic engine oil, remove the accumulated product of the cylinder combustion chamber and the spark plug, and find that the problem is eliminated at any time. Even a small fault will reduce the power of the engine and waste fuel. Regular replacement of air and oil filters will affect fuel consumption.
At the same time, if you feel that your car is running out of power, you have to stop to see if there is a leak in the tire. If the tire pressure is too low, the fuel consumption will increase significantly. Keep the balance of the tire, check the tire's pattern from time to time to see if there is any uneven wear. At the same time to see if there is no sharp object embedded in the tire and cause a gradual leak. Always check the tire pressure to keep it in the best condition. Not enough gas or too much gas will increase fuel consumption. Therefore, tire pressure should be checked regularly. As long as there is a tire less 4kPa, this tire will reduce the life of 10,000km, but also make the total heavy fuel consumption of the heavy wrecker .
function structure, thereby extending the service life of the hoist. This drilling rig is a vertical transmission rotary drilling
rig with mechanical transmission and hydraulic feed. It can be applied to engineering geological survey, general survey of
solid deposits, grouting of dams and ventilation and drainage of tunnels. Depending on the drilling formation, cemented
carbide, steel grit, and auger types can be used for drilling.
Main Feature:
The structure of this rig has the following features:
1. A more reasonable speed range is selected. There are eight speed levels, centralized speed change, self-locking with
each other, large low-speed torque, and a wide range of use.
2. The drilling rig has two speeds of reversing speed, which is convenient for handling faults safely.
3. The self-centering hydraulic chuck is adopted, which is convenient for clamping and loosening the drill pipe. And has
a hydraulic feed mechanism, strong pressure and lifting capacity.
4. Equipped with sufficient instruments, it is helpful to grasp the situation in the hole, fewer operating handles, more
reasonable layout, flexible and reliable operation.
5. The two-plate normally closed friction clutch is adopted, which is flexible to open and close, and easy to adjust and use.
6. The rig is light in weight, compact in structure, easy to disassemble, and suitable for drilling work in hills or mountains.
7. The hoist has a detachment function. Increased the service life of the hoist.