In order to ensure that the total flow channels of the fluid are similar in shape, we made a plexiglass model in a 1:1 ratio. As for the surface state of the channel, it plays a significant role in the flow state and velocity distribution of the nearby fluid, but it has little effect on the flow state and velocity distribution of the fluid far away from a certain distance. Although the plexiglass model has different resistance along with the actual sand, the local resistance is the main resistance for the gating system with short flow and complex shape, and the resistance along the way is negligible. The experimental device is mainly composed of two parts: (1) Water circulation system The entire water circulation system has two water tanks, one as a water supply tank above the support and the other as a storage tank under the test bench. After the experiment began, the motor was started and the water in the storage tank was lifted into the water supply tank. When the water level exceeds the height of the siphon tube, open the water supply control valve and start the experiment. (2) Experimental bench The experimental bench is mainly used to place the model so that the filling is stable and easy to control. It mainly includes water trays and boxes. Before simulating the pouring, the experimental device should be leveled and the sealing of each part checked. Only when the various conditions meet the requirements can the experiment be conducted. Conclusions (1) In some cases, hydraulic simulation is a good method to verify the gating system, and it can easily observe the pouring process. (2) Hydraulic simulation must ensure similar conditions. (3) The piston ring castings produced by the plant were verified by hydraulic simulation experiments, and the local dimensions were modified. The performance of all aspects will be better.
Push-out Metal Baler machine is mainly suitable for steel recovering and processing industries, ferrous and non-ferrous smelt industries:
6) Hydraulic driven with hand-value or PLC, use diesel engine when electrical motor is unavailable.
Push-out Baler, Push-out Baling Machine, Push-out Baling Press, Push-out Baler Equipment, Push-out Metal Compactor Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.ecometalsrecycle.com
1) lining plate--Hardox500.
2) bale discharging way is side push-out.
3) designed with quick unit that can improve work efficiency substantially.
4) A new integration design: Avoid secondary installation, convenient for transporation.
5) Hydraulic transmission, compact design, great sealing property.