Magnetic pump in the course of daily use recommended that the majority of users should do the following maintenance work: (1) Check the magnetic pump pipeline and the combination of loose phenomenon. Rotate the magnetic pump by hand to see if the magnetic pump is spirited. (2) If there is abnormal sound of magnetic pump should stop immediately check the reasons. (3) Unscrew the diversion screw plug of the magnetic pump body, and pour water (or slurry). (4) close the outlet valve and outlet pressure gauges and import vacuum gauge. (5) Move the motor to see if the motor is steered correctly. (6) magnetic pump in operation, the bearing temperature can not exceed the ambient temperature 35C, the maximum temperature shall not exceed 80C. (7) try to control the flow and head of the magnetic pump in the range indicated on the plate to ensure that the maximum efficiency of the magnetic pump operation, in order to get the maximum energy-saving effect. (8) start the motor, when the normal operation of the magnetic pump, open the outlet pressure gauge and inlet vacuum pump as it shows the appropriate pressure, and gradually open the gate valve, while checking the motor load conditions. (9) Add bearing lubricating oil to the bearing body, observe the oil level should be at the center line of the oil standard, lubricating oil should be replaced or replenished promptly. (10) to stop using the magnetic pump, first close the gate valve, pressure gauge, and then stop the motor. (11) magnetic pump in the first month of work, after 100 hours to replace the oil, after every 500 hours, oil change time. (12) Often adjust the packing gland to ensure normal drip leakage in the packing room. (13) Regular inspection of the sleeve wear, wear and tear should be promptly replaced. (14) When the magnetic pump is used in the winter season, after stopping the pump, unscrew the drain plug at the lower part of the pump to release the medium. Prevent cracking. (15) long-term deactivation of the magnetic pump, pump all the necessary open, dry the water, the rotating parts and joints coated with grease installed.
Newtec Serise ACM Mill
Newtec has been designed and manufactured as an optimized standard machine in both technical and finacial point of view.
Advantage:
36 months no question quarantee.
Free installation(no cost for internation flight, accommodation or Yuanli's staff salary)
Saftety as the first concern, considered to pass all safety retulation, to ensure safe operation. This safety has considered in all mechanical and electrical design.
CE standard applied in all parts of this machine.
-Spare Parts Replacement and Repair Service Provided
Formulation Provided (our advantage):
We can supply all Powder Coating Raw Materials( polyester resin, epoxy resin, barium sulfate, gloss agent and so on) in the formulation.
Low Noise Powder Coating Acm Mill,Grinding Milling Machine,.Powder Coating Milling Machine,Acm Grinder Equipment Yantai Yuanli Corp Ltd , https://www.yuanlicorpcn.com
Credit for spare parts, 10% of total value of products would be credited for urgent supply of spare parts.
Some customers are worried their final products if can get best result, we have our own formulator (Engineer for powder coating formulation) who is testing and updating the formulation according to customer requirement all the time. And have very good experience for the formulation to support customer to make different effect powder coatings.
ã€Print】 ã€Close】