Direct Thermal Labels,Thermal Label Stock,Direct Thermal Label Stock,Stock Thermal Transfer Labels Jiangmen Hengyuan Label Technology Co., Ltd , https://www.jmhylabels.com
As a kind of equipment that plays a role in building construction, building intercom is what people often call "doorbells." In the course of more than two decades of development, building intercoms have gradually entered the direction of networked smart homes, and the structure of intercom products has become more upscale. How should consumers understand digital intercom and analog intercom to better choose?
First, the advantages and disadvantages of analog intercom and digital intercom
1. Interface docking comparison simulation: often self-routing into a separate network system. The industry lacks standards, and products from different manufacturers cannot be interconnected. At the same time, video intercom systems are difficult to interconnect with other weak electronic systems.
Digital: Using TCP/IP, you can borrow a broadband network in your community. Multiple weak electronic systems can share the same broadband network. The network cost is low. The standard interface is used to improve the practicality of the equipment and achieve the unity of the management platform of the community. .
2. Contrast simulation of video transmission: analog intercom in the cell video networking, but when the distance exceeds 1KM, the image quality cannot be guaranteed.
Digital: Digital video intercom is based on the TCP/IP network protocol. Data is shared on the network. The most advanced algorithms and decoding techniques are adopted for video compression and extraction. Even when the distance is long, the image quality is still clear. 
3. Comparison of communication quality simulation: analog talkback is a bus system, is a half-duplex communication mode, when one of the door machine call management center, the other wall machine or sub-management can not be free from existence of a busy line.
Digital: Because it is connected to a broadband network, the center has a switch, and its communication is a full-duplex communication method, which allows multi-channel real-time data exchange, which is not only concise and fast, but also effectively avoids busy lines.
4. Installation and commissioning comparison simulation: There are many networking devices in the analog intercom system, such as networking switchers, interlayer isolators, signal amplifiers, etc. Any device failure will increase the amount of commissioning engineering, and only such manufacturers can provide intermediate devices. The replacement will depend on the manufacturer.
Digital: The digital intercom system adopts the standard TCP/IP protocol, which saves many switch systems and intermediate devices of the intercom system. It is easy to debug and easy to configure and replace. 
5. System maintenance comparison simulation: The traditional analog intercom system must be set up on a device-by-device basis. Failures can only be passively waited for users to be notified to know that system upgrades require professional on-site chip replacement to complete.
Digital: Through the background software, you can complete the setup and test of each device. Through the management center software, you can know the running status of the device at any time. For the upgrade of the system, you can upgrade the terminal automatically through online, without manual intervention.
The building intercom is the "doorbell" that everyone often says. In the course of more than two decades of development, building intercoms have gradually entered the direction of networked smart homes, and the structure of intercom products has become more upscale. How should consumers understand digital intercom and analog intercom to better choose?