President Wang is one of the old customers of
S&A with the company mainly engaged in lasers, among which fiber
laser has always been cooled by S&A water chiller. With many years`
cooperation, President Wang gives high comments on the quality of
S&A water chiller, praising that S&A water chiller is reliable
with guaranteed quality.
For the very reason that President Wang has confirmed the quality of
S&A water chiller, he decides to leave the cooling of YAG laser to
S&A water chiller. Recently he has made a test and used CW-6200
water chiller with 5100W cooling capacity to cool 150WYAG Welder. So
far, not a problem has been found. However we need to wait for the field
application result from the customer of President Wang. If everything
goes well, the cooling of YAG lasers will be completely done by S&A
water chiller.
Thank you so much for your support and trust in S&A. Starting
from Jan. 2016, the warranty period of S&A water chiller has been
extended to 2 years as a guarantee for your confidence in us.
CW-6200 technical parameter: http://Products/ChillerCW62005100Wco.html
CONTACT
S&A
TE:+86-20-89301885
FAX:+86-20-84309967
SKYPE:
teyuchiller
Email:
Website: http://
At present, the elbow flowmeter produced by many manufacturers of elbow flowmeters is a 90-degree elbow with a standard geometry, and the construction party installing the throttling element often directly installs the elbow directly in a suitable space, but The effect of flow measurement is not very satisfactory.
Composite Overlay Elbows are suitable for extremely severe abrasive wear and moderate to low impact.
Weld overlay cladding is a process that provides protection for metallic components by welding a layer of abrasion-resistant alloy to areas at risk of wear. It can be applied to an entire component, or only to specific areas of concern. Typical components clad by HP Welding include pipes, valves, flanges, connectors, and elbows, as well as more complex geometries such as tee pieces and wye pieces.
Typical materials for cladding in common use at HP Welding include HP700, HP700S, HP750X, HP750P and stainless steels, as well as many less common alloys.
With over 30 years of experience on the production of hardfacing products, and the technical expertise to back them up, HP Welding can meet any base material and cladding combination.
The advantages of HP Hardfacing Elbows
1. Flat surface and nice appearance
2. Good weldability to others working pieces
3. Excellent wear resistance
HP Hardfacing Elbows can be widely applied to mining site, cement plant, metallurgical equipment, dredging and power generation and any other fields where need to combat with abrasion.
Hardfacing Elbow, Wear Resistant Tube Bends, Hardfacing Wear Pipe-Elbow, Chromium Carbide Overlay Pipe HuiFeng Wear Resistant Group , https://www.hpwearsolution.com
