Many outdoor engineering operations will choose the power generation welding machine, because the power generation welding machine can be free to weld in the absence of power, so that outdoor operations more convenient, so whenever and wherever the field work, a diesel power welding machine is easy to get. However, the power generation welding machine has long-term field work, so usual maintenance and maintenance are also indispensable. Today, Xiao Bian talks about the maintenance and precautions of the Dazawa diesel generator .
The first thing to note about the diesel electric welding machine is to place the diesel generator in a flat place with a slope of no more than 5%. In the case of a hillside section, the diesel generator must be placed in a flat position; the amount of oil should be in the oil. In the middle of the grid, check the position of the air filter. If there is any dust, clean it immediately with gasoline and dry it. Apply a little oil and knead it evenly before turning on the machine. In the open position, the damper is closed, the fuel tank switch is opened, the pull cord is pulled up, the damper is pushed to the open position after the vehicle is in operation, and it is put into use after 3 to 5 minutes of no-load operation.
The next question is about the maintenance of diesel generators. It is also a concern for everyone because it directly determines the service life of diesel generators. Diesel generators need 1 to 2 days to clean the air filter once they are used. They can be used in non-Northern Shaanxi areas for 4 to 5 days. They should be changed every 4 to 5 days. When the oil is changed, the engine must be run for 3 to 5 minutes. The dirt deposited on the bottom of the oil tank is agitated into a floating state, drained from the oil discharge port, and added again, and it is not possible to add and replace without replacing the oil at the time of oil replacement. This will not achieve the effect of lubricating and protecting the engine. .
More about the maintenance and precautions of the Ozawa diesel power welder , and continue to pay attention to Ozawa. Xiao Bian will offer it to you from time to time!
Voith Coupling
Our company provide professional technical service for German Voith couplings, German Voith Couplings Overhaul, Geared Hydraulic couplings overhaul, Voith Coupling Maintenance for owned power plant.
Besides, we are specialize in comprehensive solution proposal of energy saving transformation for boiler feed water pump in thermal power plant.
It is true that the powr consumption rate of T-BFP is higher to M-BFP, so there is a requirement to transform the M-BFP, in order to decrease the station service power consumption rate:
The methods of transformation include the followings:
1. transform the M-BFP to T-BFP
2. transform the Hydraulic Coupling
3.transform the BFP
4. transform the speed adjusting mode of M-BFP. That means changing from the hydraulic coupling speed to frequency conversion.
And do you know which is the best method? And how to transform?
Please contact us directly if you are interested in this project.
Voith Coupling
Voith Coupling,Voith Turbo Coupling,Rigid Coupling,Hydraulic Coupling
Shenyang German Machine Hydraulic Transmission Machinery Co., Ltd. , http://www.hcouplingc.com
