Or be included in the C-NCAP score, AEB will become standard The AEB system detects the road surface with a sensor mounted on the vehicle. When a danger of collision is detected and the driver does not take any braking measures, the system performs automatic emergency braking to avoid collisions. AEB has a very important role in ensuring the protection of occupants, so the EU announced in 2014 that all new vehicles must be equipped with AEB systems. Vehicles without this system will not receive E-NCAP five-star safety certification. The United States and Japan have also included AEB in the new car safety rating program. However, currently in China, only some high-end models have AEBs, and their penetration rate in the Chinese market is less than 3%. It is reported that C-NCAP has planned to include AEB in the scoring system in 2018, which means that AEB will be popularized in China and gradually become the standard. Mr. Zhang Jie, chief engineer of the research and development department of Wanxiang Group Technology Center stated that no matter the development of the automotive technology itself or the government’s rigid regulations for continuously improving the road safety standards, there is an urgent need to match the new smart line control system. For MINIEYE, AEB will not only greatly increase the safety of drivers and passengers, but also be a milestone for its access to the driverless road. The success of AEB sample development marks MINIEYE's emergence from the perceived level to the control level. Sensor fusion and independent research and development WBS At the exhibition site, Wanxiang Group demonstrated AEB prototypes and played AEB test videos. When the system detects a collision risk, it will immediately transmit a signal to WBS (Wire Controlled Dynamic System), which is independently developed by Wanxiang. If the driver does not have artificial braking, the system will automatically brake. It is reported that the cooperation between Wanxiang Group and MINIEYE is based on the strong combination of the two leaders. Dr. Zhang Daqing, head of Wanxiang Group's active safety technology and the special expert of the “One Thousand Talents Program†of the Central Group, said that MINIEYE has strong capabilities in the vehicle vision perception field and is therefore responsible for the perceived level of the AEB system; Wanxiang Group has more than a dozen Years of auto parts R&D and manufacturing experience, the developed line control system can achieve active control. MINIEYE was founded in 2013 and is the first group of deep-growing vehicles with visual perception technology. MINIEYE provides solutions that use camera sensors to capture road surface information, collect data on the fly, and analyze it. When a risk of collision is detected, an early warning is issued to alert the driver and the brake system to react. In this release of the AEB sample, MINIEYE first integrated the monocular camera with two sensors of millimeter-wave radar, which can increase the accuracy of sensor identification, such as millimeter-wave radar can be in dark conditions and bad weather conditions Make up for the lack of camera. On the other hand, the WBS system independently developed by Wanxiang Group is at the leading position in China. The technology related to this product has applied for 4 invention patents and 10 utility model patents. It is understood that the debut of the AEB sample will be carried out for a year of site verification and road test, is expected in the fourth quarter of next year, a small-scale mass production. By then, the sample will become the first AEB product in China. The cooperation between Wanxiang and MINIEYE not only has a huge commercialization prospect, but also more importantly means that as a local innovation force, it breaks the monopoly of foreign suppliers and lays down an important game in the unmanned layout of domestic cars. Garbage Truck is used for municipal sanitation department dedicated to deliver a kind of special vehicles of various kinds of rubbish. Garbage Truck ISUZU Garbage Truck,Garbage Compactor Truck,Hook Lift Garbage Truck,Small Garbage Truck,Waste Management Truck,Hydraulic Lift Garbage Truck,Garbage Transporting Truck CLW GROUP TRUCK , http://www.clwgrouptruck.net
Wanxiang Group booth
Garbage truck,dump cart, garbage truck is applied to municipal sanitation garbage trucks carrying a kind of special vehicles of various kinds of rubbish. Garbage truck types are divided into: compression garbage truck, Dump Garbage Truck, garbage truck swing arm, self loader garbage truck, Hook Lift Garbage Truck (trunk detachable type garbage truck) sealed garbage trucks, hang barrel type garbage truck (since the loading and unloading garbage truck),Ro on ro off garbage truck. Mainly includes: the dongfeng, changan, FOTON, JAC, ISUZU, JMC, Forland series; garbage trucks are divided into: dongfeng xiaobawang garbage truck, dongfeng dolika garbage truck , dongfeng light duty garbage truck truck, dongfeng long head garbage truck, dongfeng 145 garbage truck, dongfeng 153 garbage truck, changan garbage trucks, FOTON, jianghuai JAC garbage trucks, ISUZU garbage trucks ,JMC Garbage truck, Forland garbage truck and so on. Garbage truck is mainly used in municipal sanitation, large factories and mines, usually used to transport all kinds of rubbish, apply to the transportation community living garbage, and can be loaded garbage compression, crushing, its density, shrinkage, greatly improve the efficiency of garbage collection and transportation. New truck has reliable quality, low fault rate and easy maintenance, low operation cost etc.
CLW GROUP TRUCK Garbage truck is mainly carry living garbage, can also transport dust, sand, stone, soil and other bulk materials, can also be in mine coal chienchung send ore or coal.
Garbage trucks function introduction: bucket can lift commit suicide by hanging, a swing arm 60 s work cycle time, the characteristics of the vehicle is rubbish bucket is separated from the body, can achieve a car with multiple trash bucket joint use, circulation transportation, fully improve the transportation capacity of vehicle, especially suitable for short-distance transport, loading, such as the sanitation department of town and cleaning, transportation, etc.
CLW GROUP TRUCK Compression garbage truck,Compactor Garbage truck by adopting the technology of mechanical and electrical integration of hydraulic, USES the automatic control system of machine, electricity, Hydraulic , filling machine, pushing shovel special device, such as the garbage load, crush, or crushed, strong loading, finally will waste compaction into cars, to destination automatically push unloading. Its outstanding characteristic: garbage collection way is simple, efficient, repeated compression and creep compression and high compression ratio, large loading quality, automation, power performance, environmental protection, high utilization efficiency of the vehicle.
Taken the compression type garbage truck abstract: compression type garbage truck is mainly through garbage load, the loading device, pushing shovel, hydraulic system, a special device such as implementation rubbish into, crush, or crushed new green the compression type garbage truck with garbage collection convenient, efficient and can automatically compressed garbage repeatedly, and creep compression, high compression ratio, large loading capacity, operation automation, sealing good characteristic.
Taken the compression type garbage truck is fully sealed type, compression in the process of sewage directly into the sewage, completely solve the secondary pollution in the process of waste transportation, key parts imported components.
Painted with the bucket hoisting frame, can be used the national general iron barrel or plastic barrels, strong loading, the trash shoved into the carriage and compaction and shirk.
type :Swing arm garbage truck
CLW GROUP TRUCK Swing arm type garbage truck configuration of the hydraulic cylinder is 1680 mm / 125 mm diameter; Swing arm stroke is: the empty flat a is 3740 mm, vertical set up working conditions as high as 3890 millimeters, multi-channel valve for the hydraulic parts factory production, function: urban garbage collection, transfer, has simple structure, flexible operation, reliable performance, high transfer efficiency (a car can match multiple trash bucket), etc.
Garbage truck products are mainly used for carrying garbage, can also transport dust, sand, stone, soil and other bulk building material, also can be in mining or coal chienchung transport ore or coal.
Sealed garbage truck
Hermetic garbage truck is mainly composed of automobile chassis, cabinets, open the door, the lifting mechanism and the electro-hydraulic control system, etc, is a new kind of machine, electricity, liquid integration fully sealed structure of the waste transportation vehicles, it not only can be used with the newly-modified LSY series of form a complete set of tips, also can be widely used in urban residents living area, industrial, commercial districts, schools, parks, scenic places such as garbage transport work.
Docking garbage truck
Docking garbage truck is garbage compression station special garbage truck, with hydraulic back cover can be opened, after loading compression good garbage block from behind, increased the volume of waste. This car is sealed, also can prevent the secondary pollution in the process of transportation.
Compression garbage truck
Compression type garbage truck used mechanical and electrical integration of liquid technology, main compartments, filling machine, pushing through garbage shovel, hydraulic system and so on special device, with automatic control system of machine, electricity, liquid, by car, fill in and pushing shovel device such as a dedicated and realize the rubbish into, crush, or crushed, strong packing, put the rubbish into carriages, compaction, and discharge function. Its main characteristic is garbage collection way is simple, efficient, with functions of automatic compression and creep compression, compression ratio, high loading quality, automation, power performance, environmental protection, high utilization efficiency of the vehicle, sealing good characteristic.
Food waste garbage truck
Food waste garbage truck is also called the Rest meal garbage truck, kitchen waste garbage trucks or waste food garbage truck, eat hutch garbage truck is one of the garbage truck, is used to collect and transport waste, food waste (swill) and special vehicles of city sludge. With the development of catering industry in our country, our country nearly 350 existing hotels, restaurants, a surprisingly high number of eat hutch garbage produced every day, its diverse collection transport way. To eat hutch garbage objects of eat hutch garbage truck is also growing fast.
Side Loader garbage truck
Side Loader garbage truck also known as the loading and unloading garbage truck, hang garbage bin garbage truck, it is mainly used for the sanitation department of municipal and large factories and mines carry a variety of waste, can also transport dust, sand, stone, soil and other bulk materials, can also transport in the mines or mine ore or coal. The sealed garbage load, hydraulic system, the operating system. Lifting system of oil cylinder (2) garbage compartments can hang down, working on the next cycle time 50 s or less.
Multifunctional garbage truck
Other garbage truck vehicles
Van body material: garbage trucks can be used (carbon steel, stainless steel, internal adopt epoxy anticorrosive processing)
Use scope: garbage trucks are widely used and city streets, garbage disposal have dump function, hydraulic operation, the dumping of convenience.
Composition of garbage truck
Garbage truck has compression garbage truck, garbage truck swing arm, hanging barrels of garbage truck (since the loading and unloading garbage truck), sealed garbage trucks, docking garbage truck etc. Different configuration.
Of compressed garbage truck: consists of chassis, sealed garbage load, hydraulic system, as a system. The vehicle is fully sealed type, compression, dumping, all sewage into the sewage compartments in the process of compression.
Swing arm of garbage truck: consists of chassis, hydraulic lifting assembly, rubbish bucket, by about two arms shipment unified national swing arm type rubbish bucket, can be more than a car, with the function of dump, to achieve the safe and stable, reliable in performance.
Hanging barrels of garbage truck: chassis, load's total, automatic feeding device, hydraulic system, a system, etc.
Seal of garbage truck: by car chassis, cabinets, open the door, the lifting mechanism, electro-hydraulic control system, etc.
Docking garbage truck,connection garbage truck: consists of chassis, hydraulic control system, waste compartments, as a system.
The 2016 Frankfurt (Shanghai) Auto Parts Fair will be held from November 30 to December 3 at the Shanghai National Convention and Exhibition Center. It is estimated that there will be more than 5600 exhibitors from home and abroad. As a well-known supplier of auto parts systems, Wanxiang Group announced the latest AEB (Automatic Emergency Braking) prototype at the exhibition. The prototype was jointly developed with the vehicle-mounted visual perception technology expert MINIEYE and made its debut at the exhibition.